2006 E85 E86 BMW Z4 3.0i 3.0si N52B30A Engine Long Block / 144K Z4051

2006 E85 E86 BMW Z4 3.0i 3.0si N52B30A Engine Long Block
Donor Car:
2006 BMW Z4 3.0i Convertible – 144K
Functionality:
In good running condition, fully tested and ran prior to removal from the vehicle. Engine idles smoothly at 900 rpm with no misfires, smoking, or malfunctions. Compression tested with good results – (240-240-230-230-240-230). The engine did have some small oil leaks and residue from the valve cover gasket. We suggest replacing these seals and any other easy to access gasket while the engine is removed from the vehicle. Crank pulley spun smoothly with no wobbles or play. Oil and coolant have been drained with no excessive shavings or abnormalities. Will ship drained of all fluids.
Physical Condition:
In good physical condition, Engine block has not been hit or cracked in any way. Free off any major surface rusting or corrosion. The original cylinder head thermostat hose flange has been replaced with an aftermarket billet flange as shown. Includes the engine long block, valve cover, coil packs, fuel rail, injectors, wiring harness, motor mount brackets, crank pulley, intake manifold, throttle body, water pump, AC compressor, and alternator as shown. You will need to reuse some of your existing hardware and components for installation.
Fits:
2006 BMW Z4 3.0i (w/ production date BEFORE 10/2006)
Fitment Notes:
*This engine was removed from a 2007 Z4 3.0i with a production date of 07/2006. This engine will be a direct replacement for any 3.0i model with a production date BEFORE 10/2006. This may still fit later 3.0i models; however the PCV system, valve cover, and engine covers were changed for those models, so you will need to transfer those components over from your existing engine for this to work in your vehicle.*
**This engine is NOT a direct fit for other BMW models equipped with the N52 engine due to the Z4 models utilizing an electric power steering system. There are multiple accessory components and pulleys that would need to be transferred over for use in those models with hydraulic power steering.**
***Z4 3.0si models will need to reuse their existing intake manifold assembly for use***
Engine model : N52B30AE / 71143875
***Please Read Shipping Details Below***
This item will ship on a pallet via Fedex Freight to the Continental 48 States, Mexico and Canada. Please add the item to the cart to see the exact shipping costs associated with it. There will be two options for shipping, one without a liftgate equipped truck and one with a liftgate. If you have a business address with a loading dock, forklift or other means of unloading the pallet off of the delivery truck you will not need a liftgate equipped truck for delivery. If you have a residential address or are unsure about unloading the pallet from the truck please refer to the weight of the shipment above on this listing page, so you can make the decision on whether you will need a liftgate or not. For residential deliveries Fedex will contact you, at the phone number provided, to schedule an appointment for delivery. As with all freight companies they deliver to the curb, not inside, so please plan accordingly for your delivery.
Warranty Information
This engine comes with a 90 day warranty that begins on the day the engine is received by the buyer. The warranty covers the engine block, crankshaft, pistons, rods, bearings, oil pump, cylinder head, head gasket, camshafts, valves and lifters against any defects that prevent the engine from operating as intended from the factory or make noises consistent with damaged engine internals ( rod knock, spun bearings, etc). Every engine we list has been fully run tested, compression tested and when possible test driven to make sure it runs smoothly, makes no odd noises and does not overheat.
What is not included in the warranty is common wear and tear items such as: timing belt, water pump, thermostat, spark plugs, spark plug wires, sensors and seals. While these items were in working condition at the time of testing, their lifespan is usually shorter than the internals of the engine and are therefore not covered under warranty. If any seals or gaskets are leaking at the time the engine is being tested and removed, or any sensors broken or defective, they will be noted in the item description. No labor, diagnostic or towing costs will be covered under warranty. In the event of a warranty claim, please be prepared to supply pictures, video and/or a statement from a shop/mechanic to validate the claim. For diagnostic purposes during the process of a warranty claim, the engine must remain in the car as installed. Beginning the removal process or any disassembly of the engine prior to our approval will void the warranty. This warranty is non-transferrable. It is only applicable to the original purchaser.
Situations that will void the warranty:
Overheating of the engine. We install heat indicator tabs on every engine prior to shipping that show when an engine has been oper…