2012-2016 BMW E89 Z4 sDrive28i N20 2.0 Engine Long Block w/ Turbocharger / 82K Z4907

2012-2016 BMW E89 Z4 sDrive28i N20 2.0 Engine Long Block w/ Turbocharger
Donor Car:
2014 BMW E89 Z4 sDrive28i – 82K
Functionality:
In good running condition, fully tested and ran prior to removal from the vehicle. Engine idled smoothly at 900 rpm with no smoking upon startup. Engine revved smoothly with no misfires or hesitations. Compression tested with good results – (210-200-205-210). Engine had some visible oil leaks and residue from the rear main seal and valve cover gasket during testing. We do recommend replacing any other easy to access gaskets while the engine is removed from the vehicle. Crank pulley spun smoothly with no wobbles or play. Oil and coolant have been drained with no excessive shavings or abnormalities. Ships drained of all fluids. Factory turbocharger has no signs of internal damage or play in the compressor wheel. Turbocharger made good boost pressure with no smoking or boost leaks during testing. 
Physical Condition:
In good physical condition, Engine block has not been hit or cracked in any way. Free off any major surface rusting or corrosion. Includes the engine long block, valve cover, coil packs, high pressure fuel pump, fuel rail, injectors, wiring harness, motor mount brackets, crank pulley, intake manifold throttle body, AC compressor, exhaust manifold, turbocharger, starter, flex plate,  vacuum pump, water pump, and alternator as shown. This does NOT include the factory ECU module which mounts to the intake manifold. You will need to reuse some of your existing hardware and components for installation.
Fits:
2012, 2013, 2014, 2015, 2016 BMW E89 Z4 sDrive28i
Fitment Notes:
Removed from a 2015 E89 Z4 sDrive28i with the automatic transmission. This may also fit some BMW X1 models with the N20B20A engine code. This is NOT a direct fit for AWD xDrive models due to changes in the oil pan / oil pump components. You may need to transfer over some existing external components and wiring for installation.
*** Please Read Shipping Details Below***
This item will ship on a pallet via Fedex Freight to the Continental 48 States, Mexico and Canada. Please add the item to the cart to see the exact shipping costs associated with it. There will be two options for shipping, one without a liftgate equipped truck and one with a liftgate. If you have a business address with a loading dock, forklift or other means of unloading the pallet off of the delivery truck you will not need a liftgate equipped truck for delivery. If you have a residential address or are unsure about unloading the pallet from the truck please refer to the weight of the shipment above on this listing page, so you can make the decision on whether you will need a liftgate or not. For residential deliveries Fedex will contact you, at the phone number provided, to schedule an appointment for delivery. As with all freight companies they deliver to the curb, not inside, so please plan accordingly for your delivery.
Warranty Information:
This engine comes with a 90 day warranty that begins on the day the engine is received by the buyer. The warranty covers the engine block, crankshaft, pistons, rods, bearings, oil pump, cylinder head, head gasket, camshafts, valves and lifters against any defects that prevent the engine from operating as intended from the factory or make noises consistent with damaged engine internals ( rod knock, spun bearings, etc). Every engine we list has been fully run tested, compression tested and when possible test driven to make sure it runs smoothly, makes no odd noises and does not overheat.
What is not included in the warranty is common wear and tear items such as: timing belt, water pump, thermostat, spark plugs, spark plug wires, sensors and seals. While these items were in working condition at the time of testing, their lifespan is usually shorter than the internals of the engine and are therefore not covered under warranty. If any seals or gaskets are leaking at the time the engine is being tested and removed, or any sensors broken or defective, they will be noted in the item description. No labor, diagnostic or towing costs will be covered under warranty. In the event of a warranty claim, please be prepared to supply pictures, video and/or a statement from a shop/mechanic to validate the claim. For diagnostic purposes during the process of a warranty claim, the engine must remain in the car as installed. Beginning the removal process or any disassembly of the engine prior to our approval will void the warranty. This warranty is non-transferrable. It is only applicable to the original purchaser.
Situations that will void the warranty:
Overheating of the engine. We install “heat indicator tabs” on every engine prior to shipping that show when an engine has been operated at a temperature significantly higher than normal operating temperature. If these tabs show signs of overheating, the warranty will be void. If the engine in your car is being replaced due to damage fro…